DesignJet T920

System Error: Hard Disk Drive (HDD) Malfunction

This error indicates a problem with the printer's internal hard disk drive. The HDD is used for job storage, processing, and firmware functions.

Ink System Error: Ink Level Sensor Malfunction

This error indicates a problem with the ink level sensor for one or more cartridges. The printer cannot accurately determine ink levels.

Ink System Leak Detected

This error indicates that the printer has detected an ink leak within the ink delivery system. This is a critical issue that can damage internal components.

Printhead Overheating

This error indicates that one or more printheads are overheating. This can be caused by a faulty printhead, insufficient ink flow, or a problem with the printer's cooling system.

Printhead Voltage Error

This error indicates an issue with the voltage supplied to the printheads. Incorrect voltage can damage printheads or prevent them from firing properly.

Ink System Sensor Failure

This error indicates a problem with an ink system sensor, which monitors ink levels, pressure, or temperature. A faulty sensor can lead to inaccurate readings and printer malfunctions.

Ink System Power Supply Error

This error indicates a critical problem with the power supply specifically for the ink delivery system. This prevents the ink system from receiving power and operating.

Internal Heater Failure

This error indicates a problem with an internal heater element, such as a pre-heater or post-heater. These heaters are crucial for preparing media and drying ink.

Connectivity Error: Network Card Malfunction

This error indicates a problem with the printer's network interface card (NIC). The printer cannot connect to the network.