DesignJet T230

Formatter Board Failure

This error indicates a problem with the formatter board, which is the main logic board of the printer. It controls all printer functions and communication.

System Error: Main PCA Malfunction

This error indicates a problem with the printer's main board (PCA - Printed Circuit Assembly). It's a critical hardware failure that prevents the printer from operating.

Carriage Assembly Failure

This error indicates a problem with the carriage assembly, which holds the printheads and moves across the paper. It suggests the carriage motor, encoder strip, or belt might be faulty, preventing proper movement.

Formatter Board Failure

This error indicates a problem with the formatter board, which processes print data and communicates with the network/USB. It's often linked to communication issues.

Ink System Error: Ink Cartridge Failure

This error indicates a problem with one or more ink cartridges. The printer cannot detect or use the cartridge.

Printhead Not Detected

This error indicates that the printer cannot detect one or more printheads. This is often due to improper installation, dirty contacts, or a faulty printhead.

Ink Cartridge Low/Empty

This error indicates that one or more ink cartridges are low on ink or empty. The printer will prompt you to replace them to continue printing.

Service Error: Real-Time Clock (RTC) Failure

This error indicates a problem with the printer's internal real-time clock. This might affect logging or time-sensitive functions, but usually not printing.

Service Error: EEPROM Configuration Error

This error indicates a problem with the printer's non-volatile memory (EEPROM) where configuration data is stored. This can lead to incorrect settings or boot failures.

Connectivity Error: Network Card Malfunction

This error indicates a problem with the printer's network interface card (NIC). The printer cannot connect to the network.

Service Error: Firmware Corruption (Unspecified)

This error indicates a general corruption of the printer's firmware. The printer cannot boot or operate correctly.

Ink System Error: Trailing Cable Malfunction

This error indicates a problem with the trailing cable that connects the carriage assembly to the main PCA. This cable transmits data and power to the printheads.