DesignJet T7200

System Error: Main PCA Malfunction

This error indicates a problem with the printer's main board (PCA - Printed Circuit Assembly). It's a critical hardware failure that prevents the printer from operating.

Power Supply Unit (PSU) Failure

This error indicates a problem with the printer's power supply unit. The PSU is responsible for converting wall power into the various voltages needed by the printer's components.

Printhead Failure (Specific Color)

This error indicates a specific printhead is failing or not communicating properly. The '0xXXXXXXX' portion of the code usually identifies the problematic color or printhead slot.

Ink Cartridge Not Detected (Specific Color)

This error indicates that a specific ink cartridge is not detected or is not properly installed. The '0xXXXXXXX' portion of the code identifies the problematic color or slot.

Ink Cartridge Low/Empty

This error indicates that one or more ink cartridges are low on ink or empty. The printer will prompt you to replace them to continue printing.

Ink System Valve Failure

This error indicates a problem with one of the ink system valves, which control the flow of ink. A faulty valve can cause ink flow issues or leaks.

Ink System Power Supply Error

This error indicates a critical problem with the power supply specifically for the ink delivery system. This prevents the ink system from receiving power and operating.

Take-Up Reel System Failure

This error indicates a problem with the optional take-up reel system, which collects printed output. It may be jammed, disconnected, or malfunctioning.

Service Error: Data Bus Error

This error indicates a problem with the internal data communication pathways (bus) between major components. This is a critical system failure.

Service Error: Non-Volatile Memory (NVM) Failure

This error indicates a problem with the printer's non-volatile memory, which stores critical settings and calibration data. The printer may lose settings or fail to boot.

Service Error: Component Initialization Failure

This error indicates that a specific internal component failed to initialize during startup. The printer cannot function correctly.

Service Error: Critical System Resource Exhaustion

This error indicates that the printer has run out of critical system resources (e.g., memory, processing power) to perform its tasks. This can lead to crashes.

Starwheel Motor Failure

This error indicates a problem with the starwheel motor assembly, which helps to flatten and guide the paper after printing. A malfunction can cause paper jams or printing issues.