DesignJet T600

Printhead Missing/Not Installed

This error indicates that a printhead is either missing from its slot or was not properly installed. The printer cannot detect the presence of a printhead.

Ink Supply Station Failure

This error indicates a general failure of the Ink Supply Station (ISS), which manages ink delivery from cartridges to printheads. It could be a pump, sensor, or valve issue.

Ink Cartridge Not Detected (Specific Color)

This error indicates that a specific ink cartridge is not detected or is not properly installed. The '0xXXXXXXX' portion of the code identifies the problematic color or slot.

Internal Heater Failure

This error indicates a problem with an internal heater element, such as a pre-heater or post-heater. These heaters are crucial for preparing media and drying ink.

Service Error: Internal Communication Error

This error indicates a general problem with internal communication between the printer's components. This prevents the printer from functioning.

Service Error: EEPROM Configuration Error

This error indicates a problem with the printer's non-volatile memory (EEPROM) where configuration data is stored. This can lead to incorrect settings or boot failures.

System Error: Internal Power Failure

This error indicates a general internal power failure within the printer, potentially affecting multiple components. The printer cannot power on or operate.

Connectivity Error: Wireless Module Malfunction

This error indicates a problem with the printer's wireless communication module. The printer cannot connect to a wireless network.

Ink System Error: Carriage Latch Sensor Malfunction

This error indicates that the printer cannot detect the correct state of the carriage latch, which secures the printheads. This can prevent printing.

Hardware Error: Main PCA Firmware Update Failure

This error indicates that a firmware update to the Main PCA has failed or is corrupted. The printer may not be able to boot or function correctly.

Firmware Error: PostScript/Raster Processor Error

This error indicates a problem with the printer's internal processing of print jobs, specifically related to PostScript or raster data. It might be triggered by a complex print file.

Firmware Error: Critical Firmware Error

This is a general critical firmware error indicating an unrecoverable problem with the printer's operating system. The printer cannot function.

Paper Handling Error: Media Sensor Malfunction

This error indicates a problem with a paper sensor. The printer cannot detect paper presence or position, leading to loading or feeding issues.

Starwheel Motor Failure

This error indicates a problem with the starwheel assembly motor, which raises and lowers the starwheels that help guide the media after printing. It might be jammed or faulty.