DesignJet T1600

System Error: Power Supply Unit (PSU) Malfunction

This error indicates a problem with the printer's power supply unit. The printer is not receiving stable or correct power, preventing it from functioning.

Front Panel Failure

This error indicates a communication problem with the front panel display or its associated electronics. The printer may not respond to button presses or display garbled information.

Hard Disk Drive (HDD) Failure

This error indicates a problem with the printer's internal hard disk drive. The HDD stores print jobs, firmware, and printer settings.

Printhead Missing/Not Installed

This error indicates that a printhead is either missing from its slot or was not properly installed. The printer cannot detect the presence of a printhead.

Printhead Not Calibrated

This error indicates that a newly installed printhead has not been calibrated, or a previous calibration failed. This can lead to print quality issues.

Printhead Life Expired

This error indicates that one or more printheads have reached the end of their estimated useful life. While they may still function, print quality is likely to degrade.

Memory Error

This error indicates a problem with the printer's internal memory (RAM). This can prevent the printer from booting up or processing print jobs correctly.

Printhead Blocked/Clogged

This error indicates that one or more printheads are severely clogged or blocked, preventing ink from being ejected properly. This leads to missing colors or poor print quality.

Ink System Prime Failure

This error indicates that the printer failed to prime the ink system, meaning it could not successfully draw ink from the cartridges to the printheads. This often points to air in the lines or a pump issue.

Ink System Pressure Failure

This error indicates an issue with the ink system's pressure regulation. It could be due to a leak, a faulty pump, or a sensor problem, preventing proper ink delivery.

Ink Supply Station Failure

This error indicates a general failure of the Ink Supply Station (ISS), which manages ink delivery from cartridges to printheads. It could be a pump, sensor, or valve issue.

Ink Maintenance Cartridge Full/Missing

This error indicates that the ink maintenance cartridge (waste ink tank) is full or missing. The printer cannot operate until it is replaced or properly installed.

Ink System Error: Printhead Failure (General)

This error indicates a general failure of one or more printheads. The printer cannot communicate with or use the printheads, preventing printing.

Ink System Error: Ink Supply Station Malfunction

This error indicates a problem with the ink supply station, which delivers ink from the cartridges to the printheads. The printer cannot supply ink.

Printhead Failure (Specific Color)

This error indicates a specific printhead is failing or not communicating properly. The '0xXXXXXXX' portion of the code usually identifies the problematic color or printhead slot.

Ink System Error: Ink Cartridge Failure

This error indicates a problem with one or more ink cartridges. The printer cannot detect or use the cartridge.

Ink System Error: Ink Level Sensor Malfunction

This error indicates a problem with the ink level sensor for one or more cartridges. The printer cannot accurately determine ink levels.

Ink System Pressure Error

This error indicates an issue with the ink pressure within the printer's ink delivery system. This can lead to poor print quality or prevent printing altogether.

Ink System Priming Failure

This error occurs when the printer fails to successfully prime the ink system, meaning it cannot draw ink from the cartridges to the printheads. This prevents printing.

Ink Cartridge Not Detected (Specific Color)

This error indicates that a specific ink cartridge is not detected or is not properly installed. The '0xXXXXXXX' portion of the code identifies the problematic color or slot.

Ink System Leak Detected

This error indicates that the printer has detected an ink leak within the ink delivery system. This is a critical issue that can damage internal components.

Ink System Air Detection

This error indicates that the printer has detected air within the ink delivery system. Air in the ink lines can prevent proper ink flow and cause print quality issues.

Ink Cartridge Expired

This error indicates that one or more installed ink cartridges have passed their expiration date. While the printer may allow continued printing, print quality might be affected.

Ink System Sensor Failure

This error indicates a problem with an ink system sensor, which monitors ink levels, pressure, or temperature. A faulty sensor can lead to inaccurate readings and printer malfunctions.

Ink System General Error

This is a general error indicating an unspecified problem within the ink delivery system. It suggests a component is not functioning as expected, preventing proper ink management.

Service Error: Internal Communication Error

This error indicates a general problem with internal communication between the printer's components. This prevents the printer from functioning.

Service Error: Internal Memory (RAM) Failure

This error indicates a problem with the printer's internal memory (RAM). The printer cannot process jobs or may fail to boot.

Service Error: EEPROM Configuration Error

This error indicates a problem with the printer's non-volatile memory (EEPROM) where configuration data is stored. This can lead to incorrect settings or boot failures.

Connectivity Error: Network Card Malfunction

This error indicates a problem with the printer's network interface card (NIC). The printer cannot connect to the network.

Service Error: Power-On Self-Test (POST) Failure

This error indicates that the printer failed its initial power-on self-test. A critical component is not functioning, preventing the printer from booting.

Service Error: Non-Volatile Memory (NVM) Failure

This error indicates a problem with the printer's non-volatile memory, which stores critical settings and calibration data. The printer may lose settings or fail to boot.

Service Error: Component Initialization Failure

This error indicates that a specific internal component failed to initialize during startup. The printer cannot function correctly.

Ink System Error: Trailing Cable Malfunction

This error indicates a problem with the trailing cable that connects the carriage assembly to the main PCA. This cable transmits data and power to the printheads.

Carriage Error: Service Station Malfunction

This error indicates a problem with the service station, which cleans and caps the printheads. The carriage cannot move freely or the service station is stuck.

Paper Handling Error: Roll Motor Malfunction

This error indicates a problem with the motor responsible for feeding paper from the roll. The printer cannot load or advance paper.

Paper Handling Error: Take-up Reel Motor Malfunction

This error indicates a problem with the take-up reel motor, which winds printed paper onto a roll. The printer cannot collect printed output.

Paper Handling Error: Cutter Malfunction

This error indicates a problem with the automatic cutter. It may be stuck, damaged, or unable to perform its function.

Roll-to-Roll System Failure

This error indicates a problem with the optional roll-to-roll system (take-up reel). It prevents the printer from automatically collecting printed media.

Firmware Error: Critical Firmware Error

This is a general critical firmware error indicating an unrecoverable problem with the printer's operating system. The printer cannot function.

Calibration Error: Paper Axis Motor Calibration Failure

This error indicates a problem during the paper axis calibration process. The printer cannot accurately control paper movement.

Paper Handling Error: Paper Jam

This error indicates that paper is jammed within the printer's paper path. The printer cannot continue printing until the jam is cleared.

Paper Handling Error: Media Sensor Malfunction

This error indicates a problem with a paper sensor. The printer cannot detect paper presence or position, leading to loading or feeding issues.