DesignJet Z6 PostScript

Power Supply Unit (PSU) Failure

This error indicates a problem with the printer's power supply unit. The PSU is responsible for converting wall power into the various voltages needed by the printer's components.

System Error: Power Supply Unit (PSU) Malfunction

This error indicates a problem with the printer's power supply unit. The printer is not receiving stable or correct power, preventing it from functioning.

System Error: Front Panel Malfunction

This error indicates a problem with the printer's front panel display or its connection. The printer may still function, but user interaction is limited.

Printhead Missing/Not Installed

This error indicates that a printhead is either missing from its slot or was not properly installed. The printer cannot detect the presence of a printhead.

Printhead Temperature Sensor Error

This error indicates a problem with the temperature sensor on one or more printheads. The printer cannot accurately monitor the printhead temperature, which is crucial for proper operation.

Ink Cartridge Low/Empty

This error indicates that one or more ink cartridges are low on ink or empty. The printer will prompt you to replace them to continue printing.

Ink System Power Supply Error

This error indicates a critical problem with the power supply specifically for the ink delivery system. This prevents the ink system from receiving power and operating.

Calibration System Failure

This error indicates a problem with the printer's internal calibration system. This can prevent accurate printhead alignment, color calibration, or media advance calibration.

Take-Up Reel System Failure

This error indicates a problem with the optional take-up reel system, which collects printed output. It may be jammed, disconnected, or malfunctioning.

Carriage Error: Carriage System Failure

This is a general critical error indicating a failure within the entire carriage system. The carriage cannot move or operate correctly.

Paper Handling Error: Media Advance System Failure

This error indicates a critical failure in the paper advance system. The printer cannot load or move paper correctly, preventing printing.

Service Error: Environmental Sensor Malfunction

This error indicates a problem with an internal environmental sensor (e.g., temperature, humidity). The printer may not be able to operate optimally or safely.

Service Error: Internal Memory (RAM) Failure

This error indicates a problem with the printer's internal memory (RAM). The printer cannot process jobs or may fail to boot.

Service Error: Real-Time Clock (RTC) Failure

This error indicates a problem with the printer's internal real-time clock. This might affect logging or time-sensitive functions, but usually not printing.

Service Error: EEPROM Configuration Error

This error indicates a problem with the printer's non-volatile memory (EEPROM) where configuration data is stored. This can lead to incorrect settings or boot failures.

System Error: Overheating Detected

This error indicates that the printer has detected an internal temperature exceeding safe operating limits. This can cause damage if not addressed.

Service Error: Firmware Corruption (Unspecified)

This error indicates a general corruption of the printer's firmware. The printer cannot boot or operate correctly.

Service Error: Motor Driver Failure

This error indicates a failure of a motor driver circuit, preventing one or more motors from operating. This is a critical hardware failure.

Service Error: Power-On Self-Test (POST) Failure

This error indicates that the printer failed its initial power-on self-test. A critical component is not functioning, preventing the printer from booting.

Service Error: Internal Communication Timeout

This error indicates that the printer's components are failing to communicate with each other within expected timeframes. This can lead to system freezes or failures.

Carriage Error: Scan-Axis Motor Malfunction

This error indicates a problem with the motor that moves the print carriage back and forth. The carriage cannot move, preventing any printing.

Hardware Error: Vacuum Fan Malfunction

This error indicates a problem with the vacuum fan, which helps hold the media flat during printing. This can lead to print quality issues or paper jams.

Firmware Error: PostScript/Raster Processor Error

This error indicates a problem with the printer's internal processing of print jobs, specifically related to PostScript or raster data. It might be triggered by a complex print file.

Calibration Error: Scan Axis Calibration Failure

This error indicates a problem during the scan axis (carriage movement) calibration. The printer cannot accurately position the printheads.

Paper Handling Error: Paper Jam

This error indicates that paper is jammed within the printer's paper path. The printer cannot continue printing until the jam is cleared.