DesignJet SD Pro Scanner

System Error: Main PCA Malfunction

This error indicates a problem with the printer's main board (PCA - Printed Circuit Assembly). It's a critical hardware failure that prevents the printer from operating.

System Error: Power Supply Unit (PSU) Malfunction

This error indicates a problem with the printer's power supply unit. The printer is not receiving stable or correct power, preventing it from functioning.

System Error: Hard Disk Drive (HDD) Malfunction

This error indicates a problem with the printer's internal hard disk drive. The HDD is used for job storage, processing, and firmware functions.

Printhead Not Calibrated

This error indicates that a newly installed printhead has not been calibrated, or a previous calibration failed. This can lead to print quality issues.

Ink Maintenance Cartridge Full/Missing

This error indicates that the ink maintenance cartridge (waste ink tank) is full or missing. The printer cannot operate until it is replaced or properly installed.

Ink Cartridge Low/Empty

This error indicates that one or more ink cartridges are low on ink or empty. The printer will prompt you to replace them to continue printing.

Connectivity Error: Network Card Malfunction

This error indicates a problem with the printer's network interface card (NIC). The printer cannot connect to the network.

Connectivity Error: USB Port Malfunction

This error indicates a problem with one of the printer's USB ports. Devices connected to this port may not be recognized.

Service Error: Firmware Corruption (Unspecified)

This error indicates a general corruption of the printer's firmware. The printer cannot boot or operate correctly.

Service Error: Internal Sensor Failure (Unspecified)

This error indicates a problem with an unspecified internal sensor. The printer may not be able to perform certain functions accurately.

Service Error: Component Initialization Failure

This error indicates that a specific internal component failed to initialize during startup. The printer cannot function correctly.

Paper Axis Motor Failure

This error indicates a problem with the motor responsible for moving the paper through the printer (the paper axis motor). It can prevent paper loading or printing.

Paper Handling Error: Cutter Malfunction

This error indicates a problem with the automatic cutter. It may be stuck, damaged, or unable to perform its function.